REVISIONX ORIGIN / FITMENT

Will the Origin fit your car?

Four things to check before fitting your RevisionX Origin, using Noah’s 2011 Subaru WRX STI as an example.

Radio only: single DIN (approx. 178 × 50 mm)
Radio + EQ: double DIN (approx. 178 × 100 mm)

Photos show a prototype. Exact dimensions and screen-clearance drawings will be available before production.

01

Fascia

A vehicle-specific fascia makes a standard-size head unit fit neatly into your dashboard.

In this STI, the factory radio is wider than the Origin, leaving gaps at the sides. The aftermarket double-DIN fascia closes those gaps. Choose one for your exact vehicle and factory audio system.

Original 2011 STI radio and factory dashboard fascia.
Original 2011 STI radio and factory dashboard fascia.
Origin in the factory fascia: visible gaps at each side.
Origin in the factory fascia: visible gaps at each side.
Origin with an aftermarket fascia for a closer fit (purchased separately).
Origin with an aftermarket fascia for a closer fit (purchased separately).
02

Screen clearance

Allow room in front of and above the radio for the touchscreen to extend and fold out. Check the dashboard lip, vents and switches, and keep essential controls accessible.

If the radio sits deeply recessed, a different fascia or mounting position may be needed. The diagram shows the movement to allow for; final clearance dimensions will follow before production.

Side-profile illustration showing the retractable touchscreen clearance, with the EQ above the radio. Check clearance for your chosen arrangement.
Side-profile illustration showing the retractable touchscreen clearance, with the EQ above the radio. Check clearance for your chosen arrangement.
03

Mounting

The Origin is designed for side brackets or a compatible mounting cage.

This STI uses the original Subaru brackets, transferred to the Origin. Other cars may need a suitable cage or fitting kit. Check the mounting holes, screw lengths and space for cables behind the radio.

Factory Subaru radio with its original side mounting brackets.
Factory Subaru radio with its original side mounting brackets.
The Subaru brackets fitted to the Origin prototype.
The Subaru brackets fitted to the Origin prototype.
Example double-DIN cage and fitting hardware. Confirm suitability before purchase.
Example double-DIN cage and fitting hardware. Confirm suitability before purchase.
04

Wiring

A vehicle-specific adapter connects the Origin’s ISO-style harness to your factory wiring without cutting the vehicle loom. Otherwise, you may splice the wires and connect accordingly.

ISO-style power and speaker harness illustration. Use the final supplied wiring diagram for installation.
ISO-style power and speaker harness illustration. Use the final supplied wiring diagram for installation.
Example Subaru-to-ISO adapter. Connector compatibility depends on the factory audio system.
Example Subaru-to-ISO adapter. Connector compatibility depends on the factory audio system.

Quick fitment checklist

  • The right fascia for your car and chosen layout.
  • Room for the screen to open without blocking controls.
  • Suitable brackets or cage, plus rear cable space.
  • The correct wiring adapter and any factory-system interfaces.

Unsure? A car-audio installer can help check your vehicle.

Explore and reserve the Origin